Almost every homeowner understands the beauty and increased aesthetics that a landscape with lush green grass, colorful flowers, and healthy trees add to a property. The sight is usually breathtaking and exudes pleasurable feelings towards the home. However, this type of landscape requires constant and automated maintenance, justifying the need for an automatic sprinkler system. In this article, we will discuss the process of installing an automatic sprinkler system.
Installing an Automatic Sprinkler System
If you are interested in installing an automatic sprinkler system for your lawn or landscape, you need to make a plan. Ideally, manufacturers of sprinkler systems customized sprinkler systems for your landscape or your region of the country. Therefore, you must be in communication with the manufacturer of the sprinkler system.
More often than not, the manufacturer provides a template for providing necessary information about your property boundaries. You provide the needed sketch and details and the manufacturer will return with a detailed plan for your landscape, specific instructions for installing the automatic sprinkler system, and the list of accessories needed to install the sprinkler system.
Ten Steps Involved in the Installation Process for an Automatic Sprinkler System
Step 1: Prepare a drawing showing the overview and layout of the automatic sprinkler system. While making the drawing, it is important to check with the local building authorities and ensure that all necessary permits are gotten.
Step 2: Excavate the Trenches. Before you start digging, you need to locate the pipe that would feed the sprinkler system. Usually, this pipe may be in the water meter in the basement or buried deep into the ground. Up next, you need to mark all the locations from the pipe to the sprinkler system and use a trenching machine to excavate for the pipe. Depending on the required depth, you may excavate between 4 and 12 inches.
Step 3: You need to make the water connection by splicing a tee fitting into the main water line. This tee fitting should come with PVC cement and a primer. If the line is copper, the right option is to solder on the tee. It bears mentioning that you should switch off the water at the meter before making this connection
Step 4: The next step is to install the zone valves. To install these valves, you need to dig a trench from the main water line to the valve box as indicated on the plan drawn in step 1.
Step 5: Up next, you need to lay the pipe for the sprinkler system. These pipes should be PVC pipes and should be joined with couplings and PVC cement.
Step 6: You need to connect the pipe to the valve box.
Step 7: Pipework is over and you can now proceed to install the pop-up sprinklers.
Step 8 involves rolling out the irrigation
Step 9: This is the part where you need to install the ground stakes
Step 10: Connect the timer wires
Conclusion
There is a lot of technicalities involved with the installation of an automatic sprinkler system. As a result, it is better to let the experts such as Chino Hills Landscaping Pros handle it.
